1) bottom is wood pallet, around is 3MM plywood , strength by steel tapes 4*6, inner is plastic film.
2) bottom is wood pallet, around is carton box , strength by steel tapes 4*6, inner is plastic film.
Qingdao or Guangzhou
15-20 after deposit
Water proof 18mm Film Faced Scaffolding Plywood
QUALITY CONTROL OF AJ SCAFFOLDING PLYWOOD
we have persistent pre-shipping inspection system.The inspection process starts immediately after order is confirmed.The grade and type of raw material,processing methods and significant points will be advised to the factory management.Our long years experienced inspectors team will check each order during production process and before shipping.An inspection report in uniform format will then be provided to our customers.Based only on the inspection report a decision in rendered whether shipment is allowed or will need further re-processing and inspection.
SPECIFICATIONS OF AJ SCAFFOLDING PLYWOOD
Film Type: Brown and black film in glossy, matt, and mesh finish
Brown film, Hardwood and Birch core, WBP phenolic glue
Brown film, Combi core, WBP phenolic glue
Brown film, Combi core, WBP glue
Black film, Combi core, WBP glue
Brown film, Poplar core, MR glue
Black film, Poplar core, MR glue
PRODUCT DETAILS OF AJ SCAFFOLDING PLYWOOD
PROJECT SAMPLES OF AJ SCAFFOLDING PLYWOOD
Our Plywood factory is one of the most famous plywood factories in China. Our factory was built in 2000, we have 6 manufacturing plants, one glue workshop and one independent laboratory. To support steady production, we have developed a poplar logs base sized about 100 hektares, our annual production capacity is around 80,000M3
Maintenance of Film Faced Scaffolding Plywood
The formwork construction process is made more efficient because of the use of modern formfork technology, which includes the use of phenolic film faced plywood. It is coated on both sides with phenolic film and is suitable for multiple use and smoother surface. The number of times used depend on the followings: 1).Sealing of Edges Phenolic fabric film faced plywood edges are fully sealed at the factory and it is most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should be sealed as soon as possible with waterproof paint.
2). Sealing of Holes Any holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
3). Cleaning and Repair To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiff brush. It may be necessary to use a hardwood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete.
4). Storage Always clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face to face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly
Welcome to contact us for more useful information of AJ scaffolding plywood! We are always waiting for you!